The Aeroplane Speaks - LightNovelsOnl.com
You're reading novel online at LightNovelsOnl.com. Please use the follow button to get notifications about your favorite novels and its latest chapters so you can come back anytime and won't miss anything.
=Biplane=--An aeroplane of which the main lifting surface consists of a surface or pair of wings mounted above another surface or pair of wings.
=Bay=--The s.p.a.ce enclosed by two struts and whatever they are fixed to.
=Boom=--A term usually applied to the long spars joining the tail of a "pusher" aeroplane to its main lifting surface. [4]
=Bracing=--A system of struts and tie wires to transfer a force from one point to another.
=Canard=--Literally "duck." The name which was given to a type of aeroplane of which the longitudinal stabilizing surface (_empennage_) was mounted in front of the main lifting surface. Sometimes termed "tail-first" aeroplanes, but such term is erroneous, as in such a design the main lifting surface acts as, and is, the _empennage_.
=Cabre=--To fly or glide at an excessive angle of incidence; tail down.
=Camber=--Curvature.
=Chord=--Usually taken to be a straight line between the trailing and leading edges of a surface.
=Cell=--The whole of the lower surface, that part of the upper surface directly over it, together with the struts and wires holding them together.
=Centre (Line) of Pressure=--A line running from wing-tip to wing-tip, and through which all the air forces acting upon the surface may be said to act, or about which they may be said to balance.
=Centre (Line) of Pressure, Resultant=--A line transverse to the longitudinal axis, and the position of which is the resultant of the centres of pressure of two or more surfaces.
=Centre of Gravity=--The centre of weight.
=Cabane=--A combination of two pylons, situated over the fuselage, and from which the anti-lift wires are suspended. [5]
=Cloche=--Literally "bell." Is applied to the bell-shaped construction which forms the lower part of the pilot's control lever in a Bleriot monoplane, and to which the control cables are attached.
=Centrifugal Force=--Every body which moves in a curved path is urged outwards from the centre of the curve by a force termed "centrifugal."
=Control Lever=--A lever by means of which the controlling surfaces are operated. It usually operates the ailerons and elevator. The "joy-stick." [6]
=Cavitation, Propeller=--The tendency to produce a cavity in the air.
=Distance Piece=--A long, thin piece of wood (sometimes tape) pa.s.sing through and attached to all the ribs in order to prevent them from rolling over sideways. [7]
=Displacement=--Change of position.
=Drift= (_of an aeroplane as distinct from the propeller_)--The horizontal component of the reaction produced by the action of driving through the air a surface inclined upwards and towards its direction of motion _plus_ the horizontal component of the reaction produced by the "detrimental" surface _plus_ resistance due to "skin-friction."
Sometimes termed "head-resistance."
=Drift, Active=--Drift produced by the lifting surface.
=Drift, Pa.s.sive=--Drift produced by the detrimental surface.
=Drift= (_of a propeller_)--a.n.a.logous to the drift of an aeroplane.
It is convenient to include "eddies" and "cavitation" within this term.
=Drift, to=--To be carried by a current of air; to make leeway.
=Dive, to=--To descend so steeply as to produce a speed greater than the normal flying speed.
=Dope, to=--To paint a fabric with a special fluid for the purpose of tightening and protecting it.
=Density=--Ma.s.s of unit volume; for instance, pounds per cubic foot.
=Efficiency=--
Output ------ Input.
=Efficiency= (_of an aeroplane as distinct from engine and propeller_)--
Lift and Velocity --------------------------- Thrust (= aeroplane drift).
=Efficiency, Engine=--
Brake horse-power ---------------------- Indicated horse-power.
=Efficiency, Propeller=--
Thrust horse-power -------------------------------- Horse-power received from engine (= propeller drift).
NOTE.--The above terms can, of course, be expressed in foot-pounds. It is then only necessary to divide the upper term by the lower one to find the measure of efficiency.
=Elevator=--A controlling surface, usually hinged to the rear of the tail-plane, the operation of which turns an aeroplane about an axis which is transverse to the direction of normal horizontal flight. [8]
=Empennage=--See "Tail-plane."
=Energy=--Stored work. For instance, a given weight of coal or petroleum stores a given quant.i.ty of energy which may be expressed in foot-pounds.
=Extension=--That part of the upper surface extending beyond the span of the lower surface. [9]
=Edge, Leading=--The front edge of a surface relative to its normal direction of motion. [10]
=Edge, Trailing=--The rear edge of a surface relative to its normal direction of motion. [11]
=Factor of Safety=--Usually taken to mean the result found by dividing the stress at which a body will collapse by the maximum stress it will be called upon to bear.
=Fineness= (_of stream-line_)--The proportion of length to maximum width.
=Flying Position=--A special position in which an aeroplane must be placed when rigging it or making adjustments. It varies with different types of aeroplanes. Would be more correctly described as "rigging position."
=Fuselage=--That part of an aeroplane containing the pilot, and to which is fixed the tail-plane. [12]
=Fin=--Additional keel-surface, usually mounted at the rear of an aeroplane. [13]
=f.l.a.n.g.e= (_of a rib_)--That horizontal part of a rib which prevents it from bending sideways. [14]
=Flight=--The sustenance of a body heavier than air by means of its action upon the air.
