Illustrated Catalogue of Cotton Machinery - LightNovelsOnl.com
You're reading novel online at LightNovelsOnl.com. Please use the follow button to get notifications about your favorite novels and its latest chapters so you can come back anytime and won't miss anything.
E1 Front Lap Calender Roll Driving Gear, 12 T.
E2 Bottom Cross Shaft Gear, driving Calender Rolls and Top Cross Shaft, 14 T.
F Large Double Intermediate, driving Top Cross Shaft, 50 T.
F1 Small Double Intermediate, driving Bottom Calender Roll, 27 T.
F2 Bottom Calender Roll, 7 in. dia.
G Top Cross Shaft Gear, 30 T.
G1 Side Shaft Driving Bevel Gear, 24 T.
H Side Shaft Bevel Gear, Calender End, 24 T.
H1 Side Shaft Bevel Gear, Feed End, 28 T.
I Compound Intermediate Bevel Gear, 28 T.
I1 Compound Intermediate Gear, driving Bottom Feed Roll, 37 T.
J Bottom Feed Roll, 2 in. dia.
{42}
J1 Bottom Feed Roll Gear, 33 T.
J2 Cage Section Top Stripping Roll Driving Gear, 9 T.; 8 T.
Gear may be used to vary speed.
K Cage Section Top Stripping Roll Intermediate Gear, 52 T.
L Cage Section Top Stripping Roll Gear, 14 T.
M Cage Section Bottom Stripping Roll Gear, 14 T.
M1 Cage Section Bottom Cage Driving Gear, 23 T.
N Cage Section Bottom Cage Intermediate Gear, 20 T.
O Cage Section Bottom Cage Gear, 181 T.
O1 Cage Section Top Cage Gear, 181 T.
P Front Lap Calender Roll, 9 in. dia.
P1 Front Lap Calender Roll Gear, 53 T.
P2 Back Lap Calender Roll Driving Gear, 24 T.
Q Back Lap Calender Roll Intermediate Gear, 22 T.
R Back Lap Calender Roll Gear, 24 T.
R1 Back Lap Calender Roll, 9 in. dia.
S 3d Calender Roll Gear, 21 T.
S1 3d Calender Roll, 5-1/2 in. dia.
T 2d Calender Roll Gear, 22 T.
T1 2d Calender Roll, 5-1/2 in. dia.
U Top Calender Roll Gear, 23 T.
U1 Top Calender Roll, 5-1/2 in. dia.
V Calender Section Top Stripping Roll Intermediate Gear, 17 T.
V1 Calender Section Top Stripping Roll Intermediate Gear, 17 T.
W Calender Section Top Stripping Roll Gear, 14 T.
X Calender Section Bottom Stripping Roll Gear, 14 T.
X1 Calender Section Bottom Cage Driving Gear, 23 T.
Y Calender Section Bottom Cage Intermediate Gear, 20 T.
Z Calender Section Bottom Cage Gear, 181 T.
Z1 Calender Section Top Cage Gear, 181 T.
{43}
BREAKER LAPPERS.
DRAFT CALCULATIONS.
[Ill.u.s.tration]
{44}
[Ill.u.s.tration]
INTERMEDIATE OR FINISHER LAPPER.
SIDE VIEW OF GEARING
{45}
[Ill.u.s.tration]
INTERMEDIATE OR FINISHER LAPPER.
SIDE VIEW OF GEARING
{46}
[Ill.u.s.tration]
INTERMEDIATE OR FINISHER LAPPER
PLAN VIEW OF GEARING
{47}
INTERMEDIATE AND FINISHER LAPPERS.
ALPHABETICAL REFERENCES TO DRAWINGS.
A Main Driving Pulley, 16 in. dia. x 4-1/4 in. face; 5-1/4 in. face for Two-beater Machine.
A1 Beater Driving Pulley, 30 in. dia. x 4-1/4 in. face, for 18-in.
Rigid Beater; 22 in. dia. x 4-1/4 in. face for Carding Beater.
B Beater Pulley, 9 in. dia. x 4-1/4 in. face (occasionally 10 in. dia.) B1 Feed Pulley, 3 in. to 13 in. dia. x 2-1/4 in. face; advancing by 1/2 in. increments.
B2 Calender Section Fan Driving Pulley, 6 in. dia. x 2-1/4 in.
face for 18-in. Rigid Beater, and 8 in. dia. x 2-1/4 in.
face for Carding Beater.
B3 Calender Fan Pulley. 8 in. dia. x 2-1/4 in. face.
C Driving Pulley for Side Shaft, etc., 12 in. dia. x 2-1/4 in. face.
C1 Evener Cross Shaft Bevel Gear, 27 T.
C2 Evener Cross Shaft Change Gear, 55-35 T; diminis.h.i.+ng by one tooth.
D Side Shaft Bevel Gear, Feed End, 27 T.
D1 Side Shaft Bevel Gear, Calender End, 18 T.
E Large Clutch Bevel Gear, 60 T.
E1 Small Clutch Gear, 17 T.
F Calender Cross Shaft Driven Gear, 96 T.
F1 Front Lap Calender Roll Driving Gear, 12 T.
F2 Calender Cross Shaft Gear, driving Calender Rolls, 14 T.
G Large Double Intermediate, driving Bottom Calender Roll, 50 T.
