Illustrated Catalogue of Cotton Machinery - LightNovelsOnl.com
You're reading novel online at LightNovelsOnl.com. Please use the follow button to get notifications about your favorite novels and its latest chapters so you can come back anytime and won't miss anything.
{212}
TWIST TABLE FOR TWISTERS.
1-1/2 IN. SINGLE LINE BOTTOM ROLLS. FRONT ROLL GEAR, 108.
1-5/8 IN. DIA. WHIRL ON SPINDLE.
[Ill.u.s.tration]
{213}
TWIST TABLE FOR TWISTERS.
1-1/2 IN. SINGLE LINE BOTTOM ROLLS. 8 IN. DIA. CYLINDER.
2-1/2 IN. DIA. WHIRL ON SPINDLE.
[Ill.u.s.tration]
{214}
TWIST TABLE FOR TWISTERS.
1-1/2 IN. DOUBLE LINE BOTTOM ROLLS. 8 IN. DIA. CYLINDER.
1-5/8 IN. DIA. WHIRL ON SPINDLE. HEAD END STUD GEAR, 108 T.
[Ill.u.s.tration]
NOTE--D1 = Head End Stud Change Gear.
E = Front Roll Change Gear.
Ratio Whirl to Cylinder Speed, 4.643.
{215}
TWIST TABLE FOR TWISTERS.
1-1/2 IN. DOUBLE LINE BOTTOM ROLLS. 8 IN. DIA. CYLINDER.
2-1/2 IN. DIA. WHIRL ON SPINDLE.
HEAD END STUD GEAR, 108.
[Ill.u.s.tration]
NOTE-D1 = Head End Stud Change Gear.
E = Front Roll Change Gear.
Ratio Whirl to Cylinder Speed, 3.095.
{216}
TWIST TABLES FOR 2 PLY.
[Ill.u.s.tration]
{217}
TWIST TABLES FOR 3 PLY.
[Ill.u.s.tration]
{218}
TWIST TABLES FOR 4 PLY.
[Ill.u.s.tration]
{219}
TWIST TABLES FOR 5 PLY.
[Ill.u.s.tration]
{220}
TWIST TABLES FOR 6 PLY.
[Ill.u.s.tration]
{221}
{222}
[Ill.u.s.tration]
CONE WINDER
{223}
CONE AND TUBE WINDERS.
Although these machines are adapted to the winding of all kinds of yarns, they are especially good for soft hosiery and underwear yarns which should be handled so as to retain their full strength and elasticity.
OPEN WIND--This feature of our machine, together with its general improved construction, enables it to wind the most delicate yarns. The open wind with its irregular coils is of great advantage, as stretching of the yarn is avoided and it unwinds freely in the knitting process.
CONE AND PARALLEL WIND--These machines are built for winding either cones or parallel tubes, from cops, bobbins, spools or skeins.
STOP MOTIONS--These are applied to all machines. The Detector Holders and Drop Wires are supplied for one or more ply, as required. When a thread breaks, the individual drum stops, thus preventing waste or single. The Stop Motions are quick and positive, and the piecing up is very easily done.
FRAMING AND CONSTRUCTION--The Winders are strong and durable. No wood is used in their construction, except for the top shelves and Friction Boards. All gearing is cut. The Casing-off Plates on each side are hinged, which facilitates cleaning.
UNIFORM TENSION--The conical and parallel Mandrels are driven by friction from the drums, and consequently the increase in diameter of the cones or tubes does not alter the tension on the yarn.
IMPROVED MANDRELS--These fit firmly in the paper cones at both ends.
