The Traveling Engineers' Association - LightNovelsOnl.com
You're reading novel online at LightNovelsOnl.com. Please use the follow button to get notifications about your favorite novels and its latest chapters so you can come back anytime and won't miss anything.
=AIR BRAKE QUESTIONS=
1. Q. What is an air brake?
A. A brake operated by compressed air.
2. Q. How is this air compressed?
A. By an air compressor on the locomotive.
3. Q. Name the different parts of the air brake as applied to the locomotive.
A. The air compressor, compressor governor, automatic and independent brake valves, distributing valve, triple valve, auxiliary reservoir, brake cylinders, main reservoir, air gauges, angle c.o.c.ks, cut-out c.o.c.ks and the necessary piping.
4. Q. What is the purpose of the main reservoir?
A. It is used for storing a large volume of air for the purpose of promptly charging and recharging the brakes. Where the engine is equipped with either the E. T. or L. T. type of brakes, main reservoir air is used to supply the air to the brake cylinders on the locomotive.
5. Q. What other appliances use main reservoir air?
A. It is used in the operation of the power reverse gear, sand blower, bell ringer, water scoop, air signal, fire door, water sprinkler and other devices.
6. Q. What does the red hand on each of the air gauges indicate?
A. The red hand on the large gauge indicates main reservoir pressure; on the small gauge, brake cylinder pressure.
7. Q. What does the black hand on each of the air gauges indicate?
A. The black hand on the large gauge indicates the equalizing reservoir pressure; on the small gauge, brake pipe pressure.
8. Q. What pressure is usually carried in the main reservoir?
A. Ninety pounds in freight and 130 pounds in pa.s.senger service. But where freight engines are equipped with duplex compressor governor, the low pressure top is adjusted to ninety pounds and the high pressure top to 130 pounds.
9. Q. What pressure is usually carried in the brake pipe?
A. Seventy pounds in freight and 110 pounds in pa.s.senger service.
10. Q. What must the air pa.s.s through in flowing from the main reservoir to the brake pipe?
A. Through the automatic brake valve.
11. Q. Name the different positions of the automatic brake valve.
A. Release, running, lap, service and emergency positions. The brake valve used with the E. T. and L. T. equipment has still another position known as holding position, which is located between running and lap positions.
12. Q. Name the different positions of the independent brake valve.
A. Release, running, lap, slow application and quick application positions.
13. Q. How many kinds of triple valves are there in use?
A. Two; plain and quick action.
14. Q. How is the automatic brake applied? How released?
A. The automatic brake is applied by a reduction of brake pipe pressure, and is released by restoring the brake pipe pressure.
15. Q. When the independent brake valve handle is placed in application position, are the train brakes affected?
A. No; only the brakes on the locomotive are applied.
16. Q. What controls the pressure in the main reservoir?
A. The compressor governor.
=EXAMINATION QUESTIONS=
SECOND SERIES
1. Q. What, in your opinion, is the best way to fire a locomotive?
A. To carry a nice, level fire on the grate, or it may be just a little heavier at the sides and front, so the air cannot come through it near the sheets as rapidly as in the center of the fire-box; always fire as light as consistent with the work required, endeavor to maintain a uniform steam pressure at all times, and avoid unnecessary black smoke and a waste of steam through the safety valves by the engine popping.
2. Q. What are the advantages of superheated steam over saturated steam in locomotive service?
A. Saving in water; saving in fuel; increased boiler capacity and a more powerful locomotive. Superheated steam does away entirely with all condensation in the cylinders, while saturated steam coming in contact with pa.s.sages in cylinder saddle and walls of cylinders, is immediately cooled and in cooling, a part of it is changed back into water which affects the pressure and therefore its capacity to do work.
3. Q. How is the saving in water produced?
A. By the elimination of all cylinder condensation present in saturated steam locomotives and the increase in volume of a given weight of steam.
4. Q. How is the saving in coal accomplished?
A. Because there is less steam used to do the same amount of work, there is less water evaporated and consequently less coal required to evaporate the water.
5. Q. How is the increased boiler capacity obtained?
A. A boiler will evaporate a certain amount of water into steam and if part of the steam is lost by condensation, only that remaining is available for running the engine. Superheating eliminates the losses, thereby increasing the available useful steam. Further, superheating increases the volume of a given weight of steam, thereby reducing the consumption of steam required to develop a certain power and consequently increases the capacity.
6. Q. How is a more powerful engine obtained?
A. By reason of the increased boiler capacity an engine may be worked farther down before a steam failure occurs.
