A System of Instruction in the Practical Use of the Blowpipe - LightNovelsOnl.com
You're reading novel online at LightNovelsOnl.com. Please use the follow button to get notifications about your favorite novels and its latest chapters so you can come back anytime and won't miss anything.
Before the student attempts to make an examination in the platinum forceps or tongs, he should first ascertain whether or not it will act upon the platinum. If the substance to be examined shall act chemically upon the platinum, then it should be examined on the charcoal, and the color of the flame ascertained as rigidly as possible. The following list of substances produce the color attached to them.
A. VIOLET.
Potash, and all its compounds, with the exception of the phosphate and the borate, tinge the color of the flame violet.
B. BLUE.
Chloride of copper, Intense blue.
Lead, Pale clear blue.
Bromide of copper, Bluish green.
Antimony, Bluish green.
Selenium, Blue.
a.r.s.enic, English green.
C. GREEN.
Ammonia, Dark green.
Boracic acid, Dark green.
Copper, Dark green.
Tellurium, Dark green.
Zinc, Light green.
Baryta Apple green.
Phosphoric acid, Pale green.
Molybdic acid, Apple green.
Telluric acid, Light green.
D. YELLOW.
Soda, Intense yellow.
Water, Feeble yellow.
E. RED.
Strontia, Intense crimson.
Lithia, Purplish red.
Potash, Violet red.
Lime, Purplish red.
The student may often be deceived in regard to the colors: for instance, if a small splinter of almost any mineral be held at the point of the flame of oxidation, it will impart a very slight yellow to the flame. This is caused, doubtless, by the water contained in the mineral. If the piece of platinum wire is used, and it should be wet with the saliva, as is frequently done by the student, then the small quant.i.ty of soda existing in that fluid will color the flame of a light yellow hue.
A. THE VIOLET COLOR.
The salts of potash, with the exception of the borate and the phosphate, color the flame of a rich violet hue. This color is best discovered in the outer flame of the blowpipe, as is the case with all the other colors. The flame should be a small one, with a lamp having a small wick, while the orifice of the blowpipe must be quite small.
These experiments should likewise be made in a dark room, so that the colors may be discerned with the greatest ease. In investigating with potash for the discernment of color, it should be borne in mind that the least quant.i.ty of soda will entirely destroy the violet color of the potash, by the subst.i.tution of its own strong yellow color. If there be not more than the two hundredth part of soda, the violet reaction of the potash will be destroyed. This is likewise the case with the presence of lithia, for its peculiar red color will destroy the violet of the potash. Therefore in making investigations with the silicates which contain potash, the violet color of the latter can only be discerned when they are free from soda and lithia.
B. THE BLUE COLOR.
(_a._) _The Chloride of Copper._--Any of the chlorides produce a blue color in the blowpipe flame, or any salt which contains chlorine will show the blue tint, as the color in this case is referable to the chlorine itself. There are, however, some chlorides which, in consequence of the peculiar reactions of their bases, will not produce the blue color, although in these cases the blue of the chlorine will be very likely to blend itself with the color produced by the base.
The chloride of copper communicates an intense blue to the flame, when fused on the platinum wire. If the heat be continued until the chlorine is driven off, then the greenish hue of the oxide of copper will be discerned.
(_b._) _Lead._--Metallic lead communicates to the flame a pale blue color. The oxide reacts in the same manner. The lead-salts, whose acids do not interfere with the color, impart also a fine blue to the flame, either in the platina forceps, or the crooked wire.
(_c._) _Bromide of Copper._--This salt colors the flame of a bluish-green color, but when the bromine is driven off, then we have the green of the oxide of copper.
(_d._) _Antimony._--This metal imparts a blue color to the blowpipe flame, but if the metal is in too small a quant.i.ty, then the color is a brilliant white. If antimony is fused on charcoal, the fused metal gives a blue color. The white sublimate which surrounds the fused metal, being subjected to the flame of oxidation, disappears from the charcoal with a bluish-green color.
(_e._) _Selenium._--If fused in the flame of oxidation, it imparts to the flame a deep blue color. The incrustation upon charcoal gives to the flame the same rich color.
(_f._) _a.r.s.enic._--The a.r.s.eniates and metallic a.r.s.enic itself impart to the blowpipe flame a fine blue color, provided that there is no other body present which may have a tendency to color the flame with its characteristic hue. The sublimate of a.r.s.enious acid which surrounds the a.s.say, will give the same blue flame, when dissipated by the oxidation flame. The platinum forceps will answer for the exhibition of the color of a.r.s.enic, even though the salts be a.r.s.eniates, whose bases possess the property of imparting their peculiar color to the flame, such as the a.r.s.eniate of lime.
C. THE GREEN COLOR.
(_a._) _Ammonia._--The salts of ammonia, when heated before the blowpipe, and just upon the point of disappearing, impart to the flame a feeble though dark green color. This color, however, can only be discerned in a dark room.
(_b._) _Boracic Acid._--If any one of the borates is mixed with two parts of a flux composed of one part of pulverized fluorspar, and four and a half parts of bisulphate of potash, and after being melted, is put upon the coil of a platinum wire, and held at the point of the blue flame, soon after fusion takes place a dark green color is discerned, but it is not of long duration. The above process is that recommended by Dr. Turner. The green color of the borates may be readily seen by dipping them, previously moistened with sulphuric acid, into the upper part of the blue flame, when the color can be readily discerned. If soda be present, then the rich green of the boracic acid is marred by the yellow of the soda. Borax, or the biborate of soda (NaO, 2BO_{3}) may be used for this latter reaction, but if it be moistened with sulphuric acid, the green of the boracic acid can then be seen. If the borates, or minerals which contain boracic acid, are fused on charcoal with carbonate of potash, then moistened with sulphuric acid and alcohol, then the bright green of the boracic acid is produced, even if the mineral contains but a minute portion of the boracic acid.
(_c._) _Copper_. Nearly all the ores of copper and its salts, give a bright green color to the blowpipe flame. Metallic copper likewise colors the flame green, being first oxidized. If iodine, chlorine, and bromine are present, the flame is considerably modified, but the former at least intensifies the color. Many ores containing copper also color the flame green, but the internal portion is of a bright blue color if the compound contains lead, the latter color being due to the lead. The native sulphide and carbonate of copper should be moistened with sulphuric acid, while the former should be previously roasted. If hydrochloric acid is used for moistening the salts, then the rich green given by that moistened with the sulphuric acid is changed to a blue, being thus modified by the chlorine of the acid.
Silicates containing copper, if heated in the flame in the platinum forceps, impart a rich green color to the outer flame. In fact, if any substance containing copper be submitted to the blowpipe flame, it will tinge it green, provided there be no other substance present to impart its own color to the flame, and thus modify or mar that of the copper.
(_d._) _Tellurium._--If the flame of reduction is directed upon the oxide of tellurium placed upon charcoal, a green color is imparted to it. If the telluric acid be placed upon platinum wire in the reduction flame, the oxidation flame is colored green. Or if the sublimate be dissipated by the flame of oxidation, it gives a green color. If selenium be present, the green color is changed to a blue.
(_e._) _Zinc._--The oxide of zinc, when strongly heated, gives a blue flame. This is especially the case in the reducing flame. The flame is a small one, however, and not very characteristic, as with certain preparations of zinc the blue color is changed to a bright white. The soluble salts of zinc give no blue color.
(_f._) _Baryta._--The soluble salts of baryta, moistened, and then submitted to the reduction flame, produce a green color. The salt should be moistened, when the color will be strongly marked in the outer flame. The insoluble salts do not produce so vivid a color as the soluble salts, and they are brighter when they have previously been moistened. The carbonate does not give a strong color, but the acetate does, so long as it is not allowed to turn to a carbonate. The chloride, when fused on the platinum wire, in the point of the reduction flame, imparts a fine green color to the oxidation flame.
This tint changes finally to a faint dirty green color. The sulphate of baryta colors the flame green when heated at the point of the reduction flame. But neither the sulphate, carbonate, nor, in fact, any other salt of baryta, gives such a fine green color as the chloride. The presence of lime does interfere with the reaction of baryta, but still does not destroy its color.
(_g._) _Phosphoric Acid._--The phosphates give a green color to the oxidation flame, especially when they are moistened with sulphuric acid. This is best shown with the platinum forceps. The green of phosphoric, or the phosphates, is much less intense than that of the borates or boracic acid, but yet the reaction is a certain one, and is susceptible of considerable delicacy, either with the forceps, or still better upon platinum wire. Sulphuric acid is a great aid to the development of the color, especially if other salts be present which would be liable to hide the color of the phosphoric acid. In this reaction with phosphates, the water should be expelled from them previous to melting them with sulphuric acid. They should likewise be pulverized. Should soda be present it will only exhibit its peculiar color after the phosphoric acid shall have been expelled; therefore, the green color of the phosphoric acid should be looked for immediately upon submitting the phosphate to heat.
(_h._) _Molybdic Acid._--If this acid or the oxide of molybdenum be exposed upon a platinum wire to the point of the reduction flame, a bright green color is communicated to the flame of oxidation. Take a small piece of the native sulphide of molybdenum, and expose it in the platinum tongs to the flame referred to above, when the green color characteristic of this metal will be exhibited.
(_i._) _Telluric Acid._--If the flame of reduction is directed upon a small piece of the oxide of tellurium placed upon charcoal, a bright green color is produced. Or if telluric acid be submitted to the reduction flame upon the loop of a platinum wire, it communicates to the outer flame the bright green of tellurium. If the sublimate found upon the charcoal in the first experiment be submitted to the blowpipe flame, the green color of tellurium is produced while the sublimate is volatilized. If selenium be present the green color is changed to a deep blue one.
D. YELLOW.
The salts of soda all give a bright yellow color when heated in the platinum loop in the reduction flame. This color is very persistent, and will destroy the color of almost any other substance. Every mineral of which soda is a const.i.tuent, give this bright orange-yellow reaction. Even the silicate of soda itself imparts to the flame of oxidation the characteristic yellow of soda.
E. RED.
(_a._) _Strontia._--Moisten a small piece of the chloride of strontium, put it in the platinum forceps and submit it to the flame of reduction, when the outer flame will become colored of an intense red. If the salt of strontia should be a soluble one, the reaction is of a deeper color than if an insoluble salt is used, while the color is of a deeper crimson if the salt is moistened. If the salt be a soluble one, it should be moistened and dipped into the flame, while if it be an insoluble salt, it should be kept dry and exposed beyond the point of the flame. The carbonate of strontia should be moistened with hydrochloric acid instead of water, by which its color similates that of the chloride of strontium when moistened with water. In consequence of the decided red color which strontia communicates to flame, it is used by pyrotechnists for the purpose of making their "crimson fire."
(_b._) _Lithia._--The color of the flame of lithia is slightly inclined to purple. The chloride, when placed in the platinum loop, gives to the outer flame a bright red color, sometimes with a slight tinge of purple. Potash does not prevent this reaction, although it may modify it to violet; but the decided color of soda changes the red of lithia to an orange color. If much soda be present, the color of the lithia is lost entirely. The color of the chloride of lithium may be distinctly produced before the point of the blue flame, and its durability may be the means of determining it from that of lithium, as the latter, under the same conditions, is quite evanescent. The minerals which contain lithia, frequently contain soda, and thus the latter destroys the color of the former.
(_c._) _Potash._--The salts of potash, if the acid does not interfere, give a purplish-red color before the blowpipe; but as the color is more discernibly a purple, we have cla.s.sed it under that color.