LightNovesOnl.com

The Pyrotechnist's Treasury Part 11

The Pyrotechnist's Treasury - LightNovelsOnl.com

You're reading novel online at LightNovelsOnl.com. Please use the follow button to get notifications about your favorite novels and its latest chapters so you can come back anytime and won't miss anything.

Many substances which go under the name of gums in commerce, are in reality resins or gum-resins.

Native turpentine, the juice of trees of the fir tribe, of the consistency of honey, yields on distillation spirit of turpentine, called also oil of turpentine, and by painters turps; the dry ma.s.s left behind in the retort is colophony or rosin. Rosin is soluble in alcohol, and is therefore a resin; rosin and resin, however, are not synonymous; all rosin is a resin; but all resins are not rosin. Rosin has been tried in pyrotechny, but is of no use: a solution of it in spirit will bind stars; but it renders them white and smoky.

Volatile, ethereal, or essential oils are obtained from plants by distillation with water; as oil of roses, lavender, thyme, peppermint, aniseed, &c.

Fixed oils are obtained from animal fat by heat; and from seeds of plants by pressure and percussion; as, train oil, cod-liver oil; palm oil, croton, linseed, cottonseed, &c.

Oxychloride of copper, if difficult to procure, may be made by laying thin pieces of copper in a dish, and pouring upon them a mixture of half water, and half hydrochloric or muriatic acid. The next day remove them, and lay them on a board in the shade to dry. When dry, brush off the green powder which will be found on the outside, with a toothbrush, into a basin of water. After a quant.i.ty is obtained, wash it as directed for sulphur, and dry it in the bag, fig. 33. Test it with litmus paper to ascertain if free from acid.

Saw a piece of c.o.ke or charcoal in two, and on the flat surface place a few copper filings; direct upon them the flame of a lamp or candle with the blow-pipe; they will simply become red-hot. Lay a few more filings, and on them a little calomel or sal-ammoniac: now direct the flame, and a beautiful blue colour will be produced. Any of the salts of copper may be used to obtain the same effect, the chlorine gas liberated from the calomel (chloride of mercury) or from the sal-ammoniac (ammonic chloride) giving a blue colour to all preparations of copper burnt in it.

Weights for quickmatch may be made by nearly filling the bra.s.s tube with useless rusty old nails, tacks, screws, or odd bits of iron, or bra.s.s; then pouring in melted lead. If the ladle will not hold enough lead to fill it at once, it may be poured in at twice, thrice, four or more times. A tube 1-1/4 inch diameter and 6 inches long will weigh 2-1/2 lb.

This will keep a great length of match tight and straight. Half-an-inch at each end of the tube should be solid lead, one to receive the screw, and one to make a firm bottom.

If at any time the basil end of a pinwheel pipe should be too small to admit the nose of the funnel, it may be enlarged by binding a gum strip round it. If pinwheels are too dry, they break in winding, from the hardness of the composition; if too damp, from the softness of the paper. As paper cannot be relied upon for being always of uniform thickness, if it be found that a pinwheel pipe is too thin, cut the strip a little broader. Discretion may be used in all cases.

Coloured lances may be primed with meal powder very slightly damped with thin lac solution. Leader pipes may, if preferred, be fastened to lances with patent short whites: they may be procured at the haberdasher's; the price of them is 2_d._ per oz. Push the pin through the side of the leader, down into the side of the lance; then make a triangular hole through the middle of the leader, down into the middle of the lance, turning the tool round to break the priming, and secure the leader with a gum strip. The gum strip, bent round, a.s.sumes the shape of the capital letter T. The best tool for making the holes is a steel bradawl, ground triangular and to a sharp point; another bradawl ground to a tapering point like a needle, about 3/4 of an inch long, may be used for making holes up the lances to receive the wires. Scissor-grinders will shape them, if you have not a grindstone; or they may be rubbed on a stone, such as used by mowers to whet their scythes. Afterwards set them sharp on a hone.

Fig 169 is a wasp-light. The proper composition will be found among the fuses: drive it into a roman candle case with the rammer, fig. 4. Bring the leader from the mouth b, backwards along the outside of the case, and tie it in a couple of places, as drawn. Evening is the best time to use it: push the end b into the nest, light at a, and retire.

Instead of a five-pointed star, a seven-lance star, fig. 170, may be employed. To form it, have a piece of deal board, half-an-inch thick, 6-1/2 inches square: draw the diagonals, to find the centre; and, with a pair of compa.s.ses, stretched to a 3-inch radius, describe a circle.

Carry the radius 6 times round it; and in the points and the centre drive 7 French nails; cut off their heads, and fix on them 7 lances: the middle one, crimson; the others, 3 green and 3 blue, placed alternately.

In forming a rocket spindle, taper it no more than will just make it deliver: the thicker it is left at the top, the stronger of course it will be. For small rockets, 3/8 or 4/8, a bra.s.s, iron, or steel wire, with a few notches filed in it, or made jagged with a cold chisel and hammer, driven into a block, will hold firm without a screw. I have seen them driven into a piece of thick plank, and the nipple formed with an inch-length of wood, cut cylindrical, bored and slipped over the spindle, like c in fig. 155. Indeed, a spindle might be formed from a 5-inch or 6-inch carriage-bolt. At Woolwich a.r.s.enal rockets are charged solid. The fuse is shaped into pellets, something like large peppermint lozenges, or cylindrical cakes of paste blacking, by hydraulic pressure in a mould. These pellets, discs, or cakes, which are almost as hard as a stone, are put into the case, and pressed in tight: the rocket is then fixed upright, and slowly drilled, as I have seen, with a conical borer, working vertically, to let the dust fall and clear itself. This mode must not be imitated by an amateur; indeed, without accurate machinery, the desired object could not be effected, and there is constant liability to danger.

The fuse of a rocket, when consolidated, a.s.sumes the form of fig. 18, with the head sawn off, except that the hollow is tapering, instead of cylindrical; and the rocket stands thus--

1/3 cup + 6 choke & hollow + 1-1/3 solid + 1/3 plaster = 8 diameters.

In the trade, meal powder, saltpetre, and charcoal, go by the names of meal, petre, and coal. Common coal, for burning in fires, is never employed in pyrotechny; it would produce only dull red sparks and smoke.

Meal, or petre, added to a fuse quickens it; sulphur slackens it. 6 meal, 1 sulphur, make a quickmatch that blows through a leader with great violence. 1 meal, 1 sulphur, will scarcely burn; pure meal only should be used for match, or grain powder with hot starch. It has already been stated that nitre in powder is sometimes adulterated with salt, and that it is impossible to make a rocket with such stuff.

Powdered chlorate of potash is sometimes adulterated with nitre: with such mixture it is equally impossible to produce good colours: nitre whitens flame, and overpowers colour.

Chlorate of potash, charcoal, sulphur, stearine, used separately, with discretion, vivify colours; calomel deepens the colour, but slackens the flame.

Star compositions which inflame vigorously in dry summer weather, will often scarcely burn at all in damp weather; this is especially the case with stars containing nitrate of strontian.

In was.h.i.+ng sulphur, stir it with a wooden spoon; if a silver one were used, a black sulphide would be formed on the surface, very difficult to remove. If silver coins in the pocket get tarnished while using sulphur, rub them with salt, or chalk, or whiting.

A magnet is convenient for lifting tacks, small screws, &c., from divisions in nail boxes.

If the bra.s.s tube formers get tarnished, sc.r.a.pe off the lacquer with a knife, sand paper them anew, and give them a fresh coat of lacquer.

Let all wheel frames and woodwork be coloured black, either with paint, or with a mixture of vegetable or lamp black and size, or thin glue, to prevent their being seen. A white thread hung upon a bush, is visible many yards off; a black one can scarcely be seen a few feet distant.

Black is not only invisible, but it throws the brilliancy of sparks, and the vividness of colours, into stronger relief.

Let every article be dried, reduced to a fine powder, put into a clean bottle, and carefully corked: also let every bottle be labelled: the labels are best stuck on with paste, not gum: gum labels are apt to drop off in damp weather.

Let all metallic articles, liable to rust, be wiped with a rag dipped into olive oil, before being laid by for future use.

Before putting aside the six-inch circular frying-pan, set it over the fire till warm, put into it a lump of tallow, and smear it with a rag: when wanted for use, set it on the fire, put into it a cupful of water and a piece of soda; make the water boil, and stir it well round; pour away the water, and dry the pan over the fire.

Let muslin sieves always be dried before being put aside; also, again, before use. Zinc sieves may simply be wiped dry.

Have a place for everything; and keep everything in its place.

Faraday, the great master in experimental lectures, always devoted many hours to the preparation of his experiments for each lecture. No point, however trifling, bearing upon the success of the experiment, was considered unimportant: he used to try the stoppers of all the bottles he had to use, to see that they had not become fixed, and thus would cause delay by requiring forcible opening. His example cannot be too carefully copied. Before firing a display, all posts, spindles, lines, staples, screws, touch-paper, portfires, pieces of leadered quickmatch, &c., should be carefully provided. A yard of tape slowmatch, hung to a nail at the top of a post, will supply fire for a long time.

A book should be kept for future guidance, in which should be written the quant.i.ty of composition required to make a certain number of articles of a certain size: by attending to this, much waste will be prevented.

Never, upon any account, leave compositions lying about; and let nothing be done by candlelight, except making cases. Quickmatch, especially, ought to be kept locked up, so that n.o.body can get to it.

Never put squibs, crackers, &c., into the pockets: a stray spark might ignite the whole, and cause most serious mischief.

Click Like and comment to support us!

RECENTLY UPDATED NOVELS

About The Pyrotechnist's Treasury Part 11 novel

You're reading The Pyrotechnist's Treasury by Author(s): Thomas Kentish. This novel has been translated and updated at LightNovelsOnl.com and has already 940 views. And it would be great if you choose to read and follow your favorite novel on our website. We promise you that we'll bring you the latest novels, a novel list updates everyday and free. LightNovelsOnl.com is a very smart website for reading novels online, friendly on mobile. If you have any questions, please do not hesitate to contact us at [email protected] or just simply leave your comment so we'll know how to make you happy.