Synthetic Tannins, Their Synthesis, Industrial Production and Application Part 9

Leather { Tannin - - - 26.37 "

substance { Hide substance - - 53.88 "

A characteristic feature is the low value of tannin, which is considerably higher [Footnote: _Ibid_., 1913, 521, 478.] where condensation products of phenolsulphonic acids are used as tanning agents; the action effected by the separate const.i.tuents, therefore, is more that of pickling.

2. Mixture of Phenolsulphonic Acid and Natural Tannins

A piece of pelt was immersed in a half-neutralised solution, measuring 6 Be., of phenolsulphonic acid, and left sixteen hours in the solution, which completely penetrated the pelt during this time; it was then transferred to a 12 Be. solution of a mixture of quebracho and chestnut, which in two days converted the pelt into a light coloured leather possessing good tensile strength.

By using a bath composed of half-neutralised phenolsulphonic acid and quebracho extract in 7 Be. solution, another piece of pelt was completely tanned in two days. The same result was obtained by first half neutralising the phenolsulphonic acid and then adding sulphited quebracho extract till a 5 Be. solution was obtained.

A piece of pelt received a 2 Be. liquor composed of 3 parts of phenolsulphonic acid and 1 part of formaldehyde for sixteen hours, and was then completely penetrated; it was subsequently transferred to a 10 Be. liquor composed of chestnut and quebracho, being completely tanned in two days. The same result was obtained on adding sufficient sodium sulphate to the above mixture of phenolsulphonic acid and formaldehyde to raise the density from 2-3 Be.

Sixty grammes of phenolsulphonic acid were partly neutralised with 100 c.c. of a 10 per cent solution of caustic soda, and 10 c.c. formaldehyde added to 400 c.c. of the mixture (2 Be.): a piece of pelt was completely penetrated by the solution in sixteen hours, and was subsequently tanned in two days, using an extract of 10 Be. Similarly, by treating a pelt with 400 c.c. of a half-neutralised solution of phenolsulphonic acid (3 Be.) plus 8 c.c. formaldehyde, and adding after eighteen hours sulphited quebracho extract to the same bath, strengthening the latter to 6 Be., the pelt was converted into leather in two days; in this case, however, much of the tannin was precipitated by the formaldehyde present in the solution. If, on the other hand, a mixture of 80 gm. dilute phenolsulphonic acid (1:1 aq) and 14 gm. of formaldehyde were cooled for several hours and subsequently strengthened with sulphited quebracho extract to 7 Be., no tannin was precipitated in the liquor, and a piece of pelt immersed in the latter was completely tanned in sixteen hours.

To prevent the precipitation of tannin caused by the formaldehyde, sulphite cellulose extract (wood pulp) was subst.i.tuted for sulphited quebracho extract, and the following experiments carried out:--

To 200 c.c. of a 6 Be. sulphite cellulose extract plus 200 c.c. of half-neutralised phenolsulphonic acid solution was added 15 c.c. formaldehyde, and this solution tanned pelt in four days; the resultant leather was light brown, firm, and possessed good tensile strength and long fibre.

Another piece of pelt was immersed in a solution of 400 c.c. phenolsulphonic acid of 3Be. plus 15 c.c. formaldehyde for eighteen hours, and was then tanned in a 6 Be. solution of sulphite cellulose extract. The resultant leather was extremely light coloured, and possessed qualities similar to those described in the former experiment. Finally, pelt was immersed in a 6 Be. solution composed of 140 gm. of a 15 Be. sulphite cellulose extract, 10 gm. of formaldehyde, 400 gm. water, 15 gm. phenolsulphonic acid, and 30 gm. of a 10 per cent caustic soda solution, and was tanned in four days. This leather also was coloured light brown, of good tensile strength, and rather firm.

These experiments prove that when pelt is treated with formaldehyde, phenolsulphonic acid, and vegetable tannins, the two former components effect, more or less, actual tannage; it is admittedly a matter of some difficulty to establish whether the effect is one of pickling or pseudo-tannage, or whether the tannage may be considered a true one. The final effect, however, is nearly always that of a true tannage, _i.e_., by varying the composition of the tanning solutions leather is obtained with properties identical with those tanned with true tannins of vegetable origin. The only difficulty encountered in these combinations is the property of formaldehyde, of precipitating the natural tannins, and it is hence essential, for practical purposes, to so arrange the combination that their value is not reduced by the property referred to.

The fact that not only compounds already existing may convert pelt into leather, but that a similar effect is obtained _inside the pelt_, by their components, is indeed of theoretical interest.

3. Tanning Effects of Different Natural Substances

In addition to the vegetable tannins, Nature has also provided other substances of vegetable origin, which, admittedly, do not effect tannage in their original state, but which may, by suitable treatment, acquire this property. The oldest information on this point is supplied by Resch, [Footnote: _Scherer's Jour_., 1801, 6, 495.] who carried out tanning experiments, using three parts of peat and one part of oak bark.

By the action of nitric acid on substances of vegetable and animal origin, Hatchett, [Footnote: _Gehlen's Jour_., 1805, 1, 545.] Chevreul, [Footnote: _Ann. Chim_., 1810, 73, 36.] and Vogel [Footnote: _Jour. Chem. Phys_., 1812, 6, 101.] claim to have obtained tanning materials, whilst later, Buff [Footnote: _Ibid_., 1827, 51, 38.]

obtained a material suitable for tanning purposes from indigo.

By subsequent treatment with lime and soot, or tar, Ashmore [Footnote: _Dingier's Jour_., 1833, 48, 67.] claims to have converted pelt into leather.

By treating peat with nitric acid, Jennings [Footnote: _Jahresber. d. Chem_., 1858, 666.] and Payne [Footnote: _ Chem. Centralbl_., 1908, ii. 554; Ger. Pat., 200, 539.] have produced artificial tanning materials.

Skey [Footnote: _Chem. News_, 1866, 206; _Zeits. f. Chem_., 1866, 753.]

obtained a dark brown extract, soluble in water and precipitating gelatine, by treating bituminous coal or lignite with nitric acid; by extracting coal with alkalies, Reinsch [Footnote: _Pharm. Centralh_., 1887, 141.] isolated a substance (pyrofuscine) which, when partly neutralised with carbon dioxide, was capable of converting pelt into leather.

In addition to these tanning materials the recovery of a substance possessing tanning properties from the so-called acid rosins has been made the subject of a patent; [Footnote: _Ger. Pat_., 36,019.] this rosin is formed when crude oil is treated with concentrated sulphuric acid in the oil refineries. The greasy substance is partly neutralised with alkali and is claimed to produce a very springy leather.

The waste liquors obtained in the manufacture of cellulose, the so-called sulphite and sodium cellulose waste, have, however, been the subject of numerous investigations, and several hundred publications have appeared and a great number of patents [Footnote: "Literatur uberiSulfitablauge" 1910-13. (Reprint from _WocheWochenblPapiePapierfabrikation_)] taken out, the first one being that of Mitscherlich [Footnote: _Jahresber. d. Chem_., 1893, 890; Ger. Pat., 72,161.] and Honig [Footnote: _Chem. Centralbl_., 1902, ii. 174; Ger. Pat., 132,224.]

The waste liquors contain large quant.i.ties of acids and lime, and in order to utilise the liquors for tanning purposes, the excessive sulphuric and sulphurous acids as well as the lime must be removed. The active tannin is no doubt the ligninsulphonic acid, and those cellulose extracts containing the largest amounts of free ligninsulphonic acid may also be considered the most efficient.

According to the author,[Footnote: _Technik.u.m_, 1912, 20, 156.] such sulphitecellulose extracts precipitate gelatine, aniline hydrochloride, ammoniacal zinc acetate, and basic coal-tar dyes, and give a greenish-black coloration with ferric chloride. These reactions indicate the presence of tanning matters in cellulose extracts.

The official shake method of a.n.a.lysis gives the following results:--[Footnote: _Ibid_.]

Tanning matters 23.0 per cent.

Non-tannins 30.3 "

Insoluble matters 0.7 "

Water 46.0 "

--------------- 100.0 per cent.

Ash 4.3 "

Sulphurous acid 0.6 "

Many other substances have been used for tanning experiments, a number of them precipitating gelatine. Zacharias [Footnote: _Zeits. f. Ang. Chem_., 1907, 1645.] obtained leather by the action of many coal-tar dyes on pelt, similarly Herzog and Adler, by using Prussian blue, Neufuchsin, patent blue V, crystal violet, and colloidal gold.

Most inorganic substances possess tanning properties when in the colloidal state, _e.g_., sulphur, halogens, chromium salts, iron salts, silver oxide, and the salts of mercury, copper, bis.m.u.th, zinc, lead, platinum, cesium, vanadium, and the rare earths (salts of cerium, lanthanum, didymium, neodymium, thorium, and zerconium).

For practical purposes, however, only sulphur, chrome, and alum salts are used, the latter two being of the greatest importance.

SECTION IV

METHODS OF EXAMINING TANNING MATTERS

Whereas the evaluation of vegetable tanning matters necessitates determinations of their practical applicability in addition to qualitative and quant.i.tative a.n.a.lyses, the latter two determinations are of practically no value when dealing with synthetic tannins. The way in which tanning matters obtained by chemical means exert their action, in addition to the intensity with which they convert pelt into leather, is the only criterion of their quality for practical (tanning) purposes; both may be demonstrated by experimental tests.

When dealing with the natural tanning materials it is desirable to know their contents of actual tanning matter, from which their special qualities as tanning agents may be deduced. Where the vegetable tanning materials have already been converted into extracts, it is essential to establish the ident.i.ty of the original material used by the qualitative reactions of the extract in addition to the quant.i.tative estimation of actual tannin contents. It is frequently necessary to examine whether the extract in question has been actually prepared from the material giving the extract its name, or whether the extract has suffered the addition of other extracts of tanning materials of but low quality. Such determinations may be undertaken by microscopical observations and by means of qualitative and quant.i.tative reactions; for this purpose many colour reactions and precipitation methods are available in addition to the determination of the molybdenum figure (Lauffmann),[Footnote: Collegium, 1913, 10.] the alcohol and ethyl acetate figures and microscopical examination (Gra.s.ser).[Footnote: Ibid., 1911, 349.] Of other adulterants tending to reduce the quality of extracts may be mentioned sugars, mineral salts, and coal-tar dyes; [Footnote: Gra.s.ser, _Collegium_, 1910, 379.] for the determination of these, the special literature should be consulted. [Footnote: Gra.s.ser, "Handbuch f. gerbereichem. Laboratorien" (Leipzig, 1914); Procter-Paessler, "Gerbereichem. Untersuchungen" (Berlin, 1901).]

Two methods are devised for the purpose of quant.i.tatively determining the tannin contents, both of which employ hide powder, and which are known as the "shake method" and the "filter bell method" respectively: the former is adopted as the official method of the "International a.s.sociation of Leather Trades' Chemists" (I.A.L.T.C.). [Footnote: And also by the Society of Leather Trades' Chemists.-_Transl._]

The original method, [Footnote: _Leather Manufacturer_, 1894, No. 9 J.S.C.I.,1894, 494.] worked out in the laboratory of the Yorks.h.i.+re College (now the University of Leeds), essentially consists in introducing 6-9 gm. of hide powder in a shaker, was.h.i.+ng it at least twice with distilled water and carefully squeezing out the powder in a linen cloth between each was.h.i.+ng. 100 c.c. of the solution to be examined, which may not contain more than 1 per cent, total solids, are introduced into the shaking bottle which is then weighed. About one-third of the washed hide powder is then added, and the bottle shaken ten to fifteen minutes; another third is then added and, after shaking, the third portion. The bottle plus contents is now weighed, and the amount of hide powder introduced ascertained by difference of the two weighings. The liquid is then filtered through filter paper, 50 c.c. of the clear filtrate evaporated in a basin, dried and weighed. The residue in the original solution is then obtained by multiplying the former by 100 (plus weight of water added with hide powder), and dividing by 100.

This method was closely investigated by a large number of leather trades' chemists, was considerably improved, and in its final form presented a method of the highest degree of accuracy; the method was therefore adopted as _The Official Method of Tanning a.n.a.lysis_ by the I.A.L.T.C., which body, at the same time, gave precise instructions as to the details of the method. The latest instructions, which are reprinted below, permit of any method of a.n.a.lysis which observes the following conditions:--

1. The solution for a.n.a.lysis must contain between 3.5 and 4.5 gm. of tanning matter per litre, and solid materials must be extracted so that the greater part of the tannin is removed at a temperature not exceeding 50 C.

2. The total solubles must be determined by the evaporation of a measured quant.i.ty of the solution previously filtered till optically clear, both by reflected and transmitted light. This is obtained when a bright object such as an electric light filament is distinctly visible through at least 5 cm thickness, and a layer of 1 cm. deep in a beaker placed on a black gla.s.s or black glazed paper appears dark and free from opalescence when viewed from above. Any necessary mode of filtration may be employed, but if such filtration causes appreciable loss when applied to a clear solution, a correction must be determined and applied as described in paragraph 6.

Filtration shall take place between the temperatures of 15 C. and 20 C. Evaporation to dryness shall take place between 98.5 C. and 100 C. in shallow, flat-bottomed basins, which shall afterwards be dried until constant at the same temperature, and cooled before weighing for not less than twenty minutes in air-tight desiccators over dry calcium chloride.

3. The total solids must be determined by drying a weighed portion of the material, or a measured portion of its uniform turbid solution, at a temperature between 98.5 C. and 100 C. in shallow, flat-bottomed basins, which shall afterwards be dried until constant weight at the same temperature, and cooled before weighing for not less than twenty minutes in air-tight desiccators over dry calcium chloride.

"Moisture" is the difference between 100 and the percentage of total solids, and "insoluble" the difference between "total solids" and "total solubles."

4. _Non-Tannins._--The solution must be detannised by shaking with chromed hide powder till no turbidity or opalescence can be produced in the clear solution by salt-gelatine solution. The chromed powder must be added in one quant.i.ty equal to 6.0-6.5 gm. of dry hide powder per 100 c.c. of the tanning solution, and must contain not less than 0.2 per cent. and not more than 1 per cent. of chromium calculated on the dry weight, and must be so washed that in a blank experiment with distilled water, not more than 5 mg. of solid residue shall be left on evaporation of 100 c.c. All water contained in the powder should be determined and allowed for as water of dilution.

5. _Preparation of Infusion_.--Such a quant.i.ty of material shall be employed as to give a solution containing as nearly as possible 4 gm. of tanning matter per litre, and not less than 3.5 or more than 4.5 gm. Liquid extracts shall be weighed in a basin or beaker and washed with boiling water into a litre flask, filled up to the mark with boiling water, and well mixed and rapidly cooled to a temperature of 17.5 C., after which it shall be accurately made up to the mark, again well mixed, and filtration at once proceeded with. Sumac and myrabolam extracts should be dissolved at a lower temperature.

Solid extracts shall be dissolved by stirring in a beaker with successive quant.i.ties of boiling water, the dissolved portions being poured into a litre flask, and the undissolved being allowed to settle and treated with further portions of boiling water. After the whole of the soluble matter is dissolved, the solution is treated similarly to that of a liquid extract.

Solid tanning materials, previously ground till they will pa.s.s through a sieve of sixteen meshes per square centimetre, are extracted in Koch's or Procter's extractor with 500 c.c. of water at a temperature not exceeding 50 C.; the extraction is then continued with boiling water till the filtrate amounts to 1 litre. It is desirable to allow the material to soak for some hours before commencing the percolation, which should occupy not less than three hours, so as to extract the maximum of tannin. Any remaining solubles in the material must be neglected or reported separately as "difficultly soluble" substances.