LightNovesOnl.com

Principles of Decorative Design Part 16

Principles of Decorative Design - LightNovelsOnl.com

You're reading novel online at LightNovelsOnl.com. Please use the follow button to get notifications about your favorite novels and its latest chapters so you can come back anytime and won't miss anything.

[Ill.u.s.tration: Fig. 155.]

The law governing the application of handle and spout to vessels is this, and the same principle applies whether the vessel be formed of metal, gla.s.s, or earthenware:--Find the centre of gravity of the vessel, which can easily be done by letting a vertical line drop over it when placed in two different positions, as in Figs. 153, 154, and where the two vertical lines intersect, as in _a_ in Fig. 155, is the centre of gravity. The position of the handle being fixed on, draw a line through the centre of the handle, and continue it through the centre of gravity of the vessel. The spout must now be at right angles to this line. If this be the case the vessel will pour freely while the handle is just hung upon the thumb or finger of the person desiring to pour from it, as may be seen from Figs. 156, 157, in which the straight line A, pa.s.sing through the centre of gravity _a_, is at right angles, as it should be, with the straight line pa.s.sing through the spout.

This law, if obeyed, will always enable liquid to be poured from a vessel without its appearing heavier than it actually is, but it will be seen that the shape of the vessel must be considered so that the spout and handle can bear this relation to each other, as in Figs.

156, 157, 158, 159, and 160. Some shapes will not admit of it, so they must be avoided, as may be seen by examining Figs. 151 and 152, which show a tea-pot of faulty shape in this respect.

[Ill.u.s.tration: Fig. 156.]

[Ill.u.s.tration: Fig. 157.]

[Ill.u.s.tration: Fig. 158.]

[Ill.u.s.tration: Fig. 159.]

A consideration of this law shows that the handles of jugs--those formed of silver, of gla.s.s, and of earthenware alike--are usually placed too high; but in this respect things are much better than they were a few years back. Now we somewhat frequently see a jug with the handle in the right place, while some years back we never did. Silver jugs are now the most generally faulty in this respect, and such mistakes as the wrong placing of the handle or spout of a vessel result only from ignorance, for no man knowing the law would violate it. Fig. 161 shows a common form of jug with its handle, but the handle is too high; the position which it should occupy is shown by the dotted line. A very excellent handle is applied to many of the French water-pots, as shown in Fig. 162.

It is unnecessary that I say more respecting the shape and general construction of silver and gold vessels, except to remark that if figures or other ornaments are beaten up on their surfaces, they must not destroy or mar their general contour.

Iron is not used with us as it should be. Not only is the effect produced when it is inlaid with silver and other metals excellent, but by this mode of work our art-creations are greatly preserved, for the iron is valueless, and the labour of removing the small quant.i.ty of precious metal inlaid would be so great as to render the gain inadequate remuneration for the time consumed in collecting it.

[Ill.u.s.tration: Fig. 160.]

[Ill.u.s.tration: Fig. 161.]

[Ill.u.s.tration: Fig. 162.]

M. Christophle, of Paris, and also M. Barbedien in a lesser degree, have commenced to inlay copper vessels with silver, and some of their works are very beautiful. The j.a.panese have from an early time inlaid silver in bronze. This inlaying of silver into copper is a step in the right direction, and should be encouraged by all lovers of art. The Indians not only inlay silver in iron, but also gold in silver and in iron; and the Italians and other peoples have inlaid metals in a similar way; and the firmness and intricacy of some specimens of this inlaying are truly marvellous.

By the process of enamelling, colour can be applied to metal, and of all arts this art of enamelling produces works which are most lovely; at least, if the best works of enamel do not surpa.s.s those produced by any other manufacture, they are equal in beauty to the works of the highest excellence. Transparent enamels are in some cases very beautiful, but they do not generally compare with the opaque enamels, such as were largely used by the Chinese about a hundred and fifty years back, and by the j.a.panese, or those now so skilfully produced by Barbedien, the Algerian Onyx Company, and Christophle, all of Paris.

Chinese _cloisonne_ enamel vases may be seen at the South Kensington Museum, and here you may also find one or two small pieces of j.a.panese enamel, as well as one or two grand specimens by Barbedien, of Paris.

The Chinese enamels have most frequently a light blue (sort of turquoise) ground, but they occur with both red, white, green, and yellow grounds; while the ornament is of mixed colours, but generally with light yellow-green, deeper blue-green, or dark blue prevailing in it.

The j.a.panese enamels have a lower tone of colour-effect than the Chinese, and the work is finer and the colours more mingled, while the modern French enamels are full in colour, and are yet rich and subdued in general effect--some of them, indeed, are most beautiful works.

The Elkingtons, of Birmingham and London, have also produced some beautiful things in this way, but not in the quant.i.ties that Barbedien has. I most strongly advise the art-student to study these works in enamel.

Niello-work is a form of enrichment applied to metal, but is not in general use; it is a difficult process. Silver snuff-boxes and pendants for watch-chains with a niello pattern upon them are not uncommon, however, in Belgium and Russia, the niello pattern appearing as dark lead-pencil work upon the silver. Some niello-work is very quiet and beautiful, but much need not be said respecting it.

Jewels may be inserted in metal, but if this is done they should be somewhat sparingly used, even in the most costly of works, for if they are abundant they produce mere glitter, and the aim of the ornamentist must in all cases be the production of repose.

CHAPTER VIII.

HARDWARE.

Having considered metal-work in its more costly branches, we come to the consideration of hardware, and I am glad that we have now to deal with such metal-work as results from the use of inexpensive materials, for it is such that must be generally employed, while works formed of the precious metals can be used only by comparatively few persons. The object of art is the giving of pleasure; the mission of the artist is that of giving enn.o.bling pleasure. If as an artist I give pleasure, I to an extent fulfil my mission; but I do so, perfectly, only when I give the greatest amount of the most refined pleasure by my art that it is possible for me to give. If by producing works which can be procured by many I give pleasure, it is well that I do so; but if the many fail to derive pleasure from my works, then I must address myself to the few, and be content with my lesser mission. Education appears to be necessary to the appreciation of all art; the artist, then, is a man who appeals to the educated. If some persons, by their superior education, are enabled to appreciate art more fully than those who are ignorant, and can consequently derive more pleasure from it than the less cultured person, it might then be desirable that the artist should address himself, through costly materials, to the few, for thereby he might be giving the greatest amount of pleasure. I always, however, like to produce works in cheap materials, for then I know that I form what is capable of giving pleasure to the poor man--if appreciative--who may possess it, as well as the rich.

In hardware we find two cla.s.ses of work in the market which appear to have little in common--the one cla.s.s being characterised by a preponderance of excellence, and the other by the dominance of what is coa.r.s.e and inartistic. The first cla.s.s of work is that which is produced by what are termed ecclesiastical metal-workers; the second consists of what is generally known as Birmingham ware.

It is an error to suppose that these so-called ecclesiastical--or mediaeval, as they are sometimes called--metal-workers produce only ecclesiastical and mediaeval work. On the contrary, some of these men--and they are now many in number--devote themselves almost exclusively to domestic work, and most of them fabricate articles in all styles of art. If I wanted an artistic set of fire-irons, I should go to one of the ecclesiastical warehouses, for there I have seen many sets that my reason commends and my judgment approves; but I never saw a set produced for the general market that I liked; and the most artistic fenders, grates, and gas-fittings, in almost any style, are to be got at these shops. I do not mean to convey the impression that all things made at these ecclesiastical warehouses are good, and that all things of Birmingham (or Sheffield) manufacture are bad, for I have seen indifferent works in these mediaeval shops, and I have seen excellent things from Birmingham--especially I might mention as good certain gaseliers produced by two of the smaller Birmingham houses--but as a rule the works found in the mediaeval warehouses are good, and as a rule the works in hardware produced by Birmingham and Sheffield are bad, in point of art.

[Ill.u.s.tration: Fig. 163.]

[Ill.u.s.tration: Fig. 164.]

It will appear a mere repet.i.tion if I insist that the materials of which works of hardware are formed be used in the easiest manner in which they can be worked, and that every article be so formed as perfectly to answer the end of its formation. Yet I must do so. Let us look for a common set of fire-irons, and we shall find that nine pokers out of ten have a handle terminating in a pointed k.n.o.b. Now, as the object of this k.n.o.b is that of enabling us to exercise force wherewith to break large pieces of coal, the folly of terminating this k.n.o.b with a point is obvious. A poker is, essentially, an object of utility; it should therefore be useful. It is ridiculous to talk of a poker as an ornament; yet we find it fas.h.i.+onable now to have a bright poker as an ornament, which is obtrusively displayed to the visitor, and a little black poker, which is carefully concealed from view, reserved for use. I cannot imagine what people will not do for show and fas.h.i.+on, but to the thinking mind such littleness as that which induces women to keep a poker as an ornament must be distressing; and until persons who desire to be regarded as educated learn to discriminate between an ornament and an article of utility, little progress in art can be made. If a poker is simply a thing to be looked at, then it may be as inconvenient as you please, for if it has no purpose to fulfil by its creation it cannot be unfitted to its purpose. The same remarks will apply to shovel and tongs. If they are intended as works of utility, then their form must be carefully considered; but if they are to be mere ornaments I have nothing to say respecting them.

[Ill.u.s.tration: Fig. 165.]

[Ill.u.s.tration: Fig. 166.]

Utility and beauty are not inseparable; but if an article of any kind is intended to answer any particular end, it should be fitted to answer the end proposed by its formation; but after it is created as a work of utility, care must be exercised in order that it be also a work of beauty. With due consideration, almost every work may be rendered both useful and beautiful, and it must ever be the aim of the intelligent ornamentist to render them so.

[Ill.u.s.tration: Fig. 167.]

[Ill.u.s.tration: Fig. 168.]

Iron is capable of being wrought in various ways; it maybe cast, or hammered, or cut, or filed. Casting is the least artistic mode of treating iron; but if iron is to be cast, the patterns formed should be so fully adapted to this method of manufacture that the mode of working may be readily apparent. It is foolish to seek to make cast-iron appear as wrought-iron: cast-iron should appear as cast-iron, and wrought-iron as wrought-iron. Cast-iron is brittle, and must not be relied upon as of great strength; while wrought-iron is tough, and will bend under great pressure rather than break.

Wrought-iron can be readily bent into scrolls, or the end of a rod of metal can be hammered flat and shaped into the form of a leaf, and parts can either be welded together or fastened by small collars, pins, or screws. One or two ill.u.s.trations of good wrought-iron work by Skidmore, Benham, and Hart, are given in the engravings.

As an ill.u.s.tration of a simple railing, is figured one shown in the International Exhibition of 1862 (Fig. 163), which is in every respect excellent. Its strength is very great, yet it is quaint and beautiful.

As it was shown it was coloured, and the colours were so applied as to increase its effect and beauty. If the student will carefully devote himself to the consideration of excellent works in metal, he will learn more than by much reading. Let him procure, if possible, the ill.u.s.trated catalogues of such men as Hart of London, Hardman of Birmingham, and Dovey of Manchester, and study the sketches which he will there see, and he will certainly discover the principles of a true art, such as he must seek to apply in a manner concordant with his own original feelings.

[Ill.u.s.tration: Fig. 169.]

Of our ill.u.s.trations, the example by Skidmore (Fig. 161) furnishes us with an excellent mode of treatment. Iron bands are readily bent into volutes, or curves of various descriptions, and the parts so formed can be united by welding, screws, or bolts. Hardman's gate (Fig. 165) is in every respect excellent; it is quaint, vigorous, and ill.u.s.trative of a true mode of working metal. The two foliated railings (Figs. 166, 167) are also very meritorious. They are simple in design, and their parts are well fastened together. I advise very strongly that the student carefully consider the ill.u.s.trations which accompany this chapter.

In iron-work the manifestation of a true constructive principle is beyond all things desirable. Iron, being a strong material, should not be formed into heavy ma.s.ses unless immense weight has to be sustained, or very great strength is required. If we form lamps, candelabra, and such works of iron, it is obvious that the portions of metal employed in their construction may be thin, as the material is of great strength. Were we to form such works of wood, then a greatly increased thickness of material would be necessary, in order that the same strength be secured, as wood is not nearly so strong as iron.

My remarks will have special reference to wrought-iron, as cast-iron cannot so fully be said to have a constructive character. The small railing (Fig. 163) is an admirable ill.u.s.tration of a true constructive formation, as the parts are all held together, and strengthened to a wonderful degree, by the introduction of a horseshoe-shaped member.

This railing is worthy of the most careful study, for its strength is great. Besides strength we have also beauty. The horseshoe form, especially when judiciously applied, is far from being offensive.

Utility must come first, and then beauty, and so it does in this particular railing; but here we have great simplicity, and a correct structural character has been arrived at in its production rather than any elaboration of the principles of beauty.

From the catalogue of J. W. Dovey, of Manchester, I select an ill.u.s.tration of structure in the form of a candelabrum which is highly satisfactory in character as a simple work (Fig. 168). There is a solidly-formed heavy base, an upright stem terminating in a candle-holder. There is an arrangement for catching waste grease, and extra strength is given to the stem by four slender b.u.t.tress-like brackets, which are securely and well attached to the base and to the stem above; and these are strengthened by two hoops, which prevent their bending under pressure.

[Ill.u.s.tration: Fig. 170.]

Figs. 169 and 170, the former being a ridge or wall cresting, and the latter a stair railing, are each ill.u.s.trations of a correct treatment, inasmuch as strength (a structural quality) and beauty (an art quality) are secured at the same time. Fig. 169 is admirably constructed, only it is a little slender above the middle horizontal line. These two ill.u.s.trations are also from Mr. Dovey's catalogue.

In the catalogue just named, and in those previously named also, many good examples may be found ill.u.s.trative of the successful combination of true structural qualities with a considerable amount of beauty, and also acknowledging the strength of the material by the lightness of the parts.

[Ill.u.s.tration: Fig. 171.]

Those who reside in, or visit, London, will do well to go to the South Kensington Museum, and study a large and splendid, candelabrum of Messrs. Hurt, Son, and Peard, which is well worthy of consideration.

Click Like and comment to support us!

RECENTLY UPDATED NOVELS

About Principles of Decorative Design Part 16 novel

You're reading Principles of Decorative Design by Author(s): Christopher Dresser. This novel has been translated and updated at LightNovelsOnl.com and has already 684 views. And it would be great if you choose to read and follow your favorite novel on our website. We promise you that we'll bring you the latest novels, a novel list updates everyday and free. LightNovelsOnl.com is a very smart website for reading novels online, friendly on mobile. If you have any questions, please do not hesitate to contact us at [email protected] or just simply leave your comment so we'll know how to make you happy.