Scientific American Volume 22, No. 1, January 1, 1870 Part 9

The three companies under whose protection Chinese are brought into California, keep an accurate account of the condition and employment of the persons they import. From these books it appears that 138,000 Chinese have been brought into California. Of these, 10,426 have died, 57,323 have returned to China, and about 91,000 still remain on the Pacific coast. But only 41,000 live in California. Of these 41,000, 9,300 are women, children, old and decrepit, or criminals confined in the jails. The California authorities have at length decided to admit Chinese testimony in the courts.

One of our subscribers residing in Maine has read our article "How to Spend the Winter Evenings," and writes to us that up in his section they have no trouble on that score. As soon as the day's work is over the inhabitants commence the job of trying to get their rooms warm, and as soon as a comfortable temperature is reached it is time to go to bed.

DESIGN PATENT DECISION.--We publish elsewhere a recent elaborate decision of Commissioner Fisher, in which he reviews the laws and former practice of the office in regard to applications for patents for designs, with the view to the establishment of a uniformity of practice in regard to design patents. The decision is one of much interest to inventors and agents, and fully warrants its publication.

OIL PAPER HANGINGS.--A kind of oil paper hangings called "Oleo Charta"

is now made in England, which, it is a.s.serted, is impervious to wet, may be placed on new or damp walls without risk of damage or discoloration, may be washed with soap and water as often as required, and will last twenty years. The process of manufacture is not explained.

THE STEVENS BREECH-LOADING RIFLE.

This new arm, a patent on which, was obtained through the Scientific American Patent Agency, June 11, 1867, is destined, in our opinion, to become a formidable rival to the breech-loading rifles which have already attained popularity. It is one of the most simple and effective guns we have yet seen. Only three motions are required to load, discharge the piece, and throw out the sh.e.l.l of the cartridge. The breech-block is side-hinged, and it is opened and the sh.e.l.l is thrown out by simply bringing the gun to half c.o.c.k. The gun may, however, be c.o.c.ked without opening the breech by pressing the trigger while c.o.c.king.

The gun, when held in position, may be fired at the rate of forty shots per minute. All the movements of the parts are directly backward and forward; in our opinion the best that can be employed for this purpose, and the least liable to get out of order. In short, the gun possesses all the essentials of a first cla.s.s rifle, and has advantages which we think are not ordinarily met with in arms of this character.

A NOVEL FRENCH HAND VISE.

In using ordinary hand vises several inconveniences are met with. For instance, if it is desired to work a piece of metal of a certain length, it must necessarily be presented obliquely on the side of the jaw of the vise, because of its screw, which is horizontal and forms a k.n.o.b in the axis of the vise. The consequences are, first, that on tightening the nut of the horizontal screw vise the pressure is only exerted on the side, and greatly tries the vise itself while obtaining an irregular pressure; secondly, that as the piece to be worked is held obliquely, however skilled the workman may be, he always finds himself cramped in the execution of his work, particularly if of a delicate nature.

To avoid these inconveniences a Parisian mechanic has designed and lately patented in England the neat form of hand vise of which we annex ill.u.s.trations, Fig. 1 being an elevation and Fig. 2 a longitudinal section. In these views, A, is a wooden or metal handle pierced throughout its length; this handle of metal may be made in one piece, with the nut, and the conical ferrule. B is the ring or ferrule of the handle; and C are the jaws of the vise worked by the adjusting screw, D, and the springs, r r. E is a conical ferrule or shoulder, fixed or movable, and serving to open or close the jaws of the vise accordingly as the handle is turned right or left; this conical shoulder is protected from wear by a tempered steel washer, v. G is a nut with collar carrying the conical ferrule or shoulder, E, and the steel washer, v, while H H are the joints of the jaws of the vise held by a screw, I, which serves as a support to the adjusting screw.

[Ill.u.s.tration: FIG. 1. FIG. 2.]

This hand vise may be applied to a number of uses, and among others it may be readily converted into a haft or handle for any kind of tailed or shanked tool, such as files, wrenches, olive bits, chisels, or screwdrivers, and may also serve as pincers or nippers. It is of very simple construction.

THE MOUND-BUILDERS IN COLORADO.

New evidence of the existence of the Mound-Builders in the mountain ranges of Colorado, similar to those in Montana, Utah, and Nevada, have recently been discovered by Mr. C.A. Deane, of Denver. He found upon the extreme summit of the snow-range structures of stone, evidently of ancient origin, and hitherto unknown or unmolested. Opposite to and almost north of the South Boulder Creek, and the summit of the range, Dr. Deane observed large numbers of granite rocks, and many of them as large as two men could lift, in a position that could not have been the result of chance. They had evidently been placed upright in a line conforming to a general contour of the dividing ridge, and frequently extending in an unbroken line for one or two hundred yards. The walls and the mounds are situated three thousand feet above the timber line.

It is, therefore, hardly supposable that they were built for altars of sacrifice. They were not large enough for shelter or defense. The more probable supposition is that, like the large mounds in Montana and elsewhere, they were places of sepulture.

THE WOVEN-WIRE MATTRESS.

Most of our readers who attended the last Fair of the American Inst.i.tute, will recall an article in the furniture department, which attracted much attention on account of its novelty and utility. We refer to the wire mattress, or bed, manufactured by the Woven Wire Mattress Company, of Hartford, Conn. To the ordinary mind a new invention is interesting or not, in proportion to the probability of its coming into every-day use, and many a good housewife lingers in admiration over an improved sewing machine or cooking stove, to whom a new steam engine has no attraction. For this reason it was that the wire mattress was sat on and lain on by the numerous visitors at the Fair.

[Ill.u.s.tration]

The engraving presented herewith will give the reader, who has not seen the article, a good idea of its appearance. It consists of a fabric represented below, half an inch thick, composed of fine wire springs, each one the length of the bed; all the three hundred spirals, being so woven and braided together, in a double "weave," by machinery, that a sort of wire cloth is produced. It differs from any other material hitherto made, in that it has great strength and elasticity. There is, in fact, no other device, except the air or water bed, which can compare with it in its elastic properties.

[Ill.u.s.tration]

We are informed that nine hundred pounds of dead weight of wire were placed on it for nearly five days, without injurious effects. This fabric is stretched on a frame, as seen in the first engraving, the proper tension is secured to suit the fancy, and the mattress is ready for use. It is then set into the bedstead, like the ordinary spring bed, except that only two slats are used to support it. Thus, with a slight covering in summer, and a thin hair mattress for warmth in winter, a most perfect sleeping arrangement is secured.

The first adaptation of the wire mattresses was for private houses, but they have been found to have special advantages for hospital use. They have been largely introduced into the Hartford Hospital, the Bellevue Hospital, New York, and the Marine Hospital, Brooklyn, and have proved to be, after months of the severest use, with all cla.s.ses of patients, a very great success for such purposes. The elastic flexible mattresses yield to every motion and part of the body, much to the relief of the suffering patient.

Another very great advantage is, that when carefully painted they are always clean.

Pillows of the same materials are made soft and pliable by using a fine wire and small coil. They are always cool, and afford the opportunity of placing bags of ice under the head in case of sickness.

One of these mattresses and a bedstead and pillows complete--all of which the Company make--furnish, with the addition of a folded blanket or comfortable, a perfect outfit for hospital use.

They are particularly useful for s.h.i.+ps' berths, as they dispense with the ordinary bottom, and the sacking and thick mattress. s.h.i.+ppers know this.

We are a.s.sured that a coating of paint, carefully applied to the well-tinned wires will protect them from rust.

There can be no question but that these beds, with a light covering--scarcely more than a sheet--are especially adapted for hot climates. The Company have already orders for them for the Brazilian market, and they have been introduced into many of the Southern States.

This wire fabric is adapted to other articles of furniture, and is used in place of the ordinary springs in chairs, sofas, etc. For out-door settees, lounges, car seats, and other like purposes, it is well adapted.

Three patents have been issued to the Company on the wire mattress, through the Scientific American Patent Agency. [See advertis.e.m.e.nt of the Woven Wire Mattress Company on another page.]

Flouring Mill Hazards.