The Standard Electrical Dictionary Part 134

As it touches one wheel it turns it in one direction. This moves a sliding contact in one direction so as to increase a resistance. This corresponds to a motion of the plunger in one direction. As the driving wheel moves in the opposite direction by a reverse action it diminishes the resistance. Thus the increase and decrease of resistance correspond to opposite movements of the solenoid plunger, and consequently to opposite variations in the current. The whole is so adjusted that the variations in resistance maintain a constant amperage. The resistance is in the exciting circuit of the dynamo.

In Brush's regulator, which is purely mechanical, a series dynamo is made to give a constant current by introducing across the field magnets a shunt of variable resistance, whose resistance is changed by an electro-magnet, whose coils are in circuit with the main current. Carbon resistance discs are used which the electro-magnet by its attraction for its armature, presses with varying intensity. This alters the resistance, decreasing it as the current increases and the reverse. As the connection is in shunt this action goes to maintain a constant current.

Regulation, Constant Potential.

The regulation of constant potential dynamos is executed on the same lines as that of constant current dynamos. If done by a controlling coil, it must for constant potential regulation be wound with fine wire and connected as a shunt for some part of the machine.

Regulation of Dynamos.

The regulation of dynamos so that they shall maintain a constant potential difference in the leads of their circuit for multiple arc systems or shall deliver a constant current in series systems. Hence two different systems of regulation are required, (a) constant potential regulation--(b) constant current regulation. The first named is by far the more important, as it concerns multiple arc lighting, which is the system universally used for incandescent lighting.

S. P. Thompson thus summarizes the methods of governing or regulating dynamos. Premising that alteration of the magnetic flux is the almost universal way of control, it can be done in two ways; first, by varying the excitation or ampere turns of the field, and second by varying the reluctance of the magnetic circuit. The excitation or magnetic flux may be varied

(a) by hand, with the aid of rheostats and commutators in the exciting circuit;

(b) automatically, by governors, taking the place of the hand;

(c) by compound windings. The magnetic circuit may have its reluctance caused to vary in several ways;

(d) by moving the pole pieces nearer to or further from the armature;

(e) by opening or closing some gap in the magnetic circuit (field-magnet core);

(f) by drawing the armature endways from between the pole pieces;

(g) by shunting some of the magnetic lines away from the armature by a magnetic shunt.

The latter magnetic circuit methods d, e, f, and g, have never met with much success except on small machines or motors. Method e is adopted in the Edison motor, the yoke being withdrawn or brought nearer the cores of the coils. (See Regulation, Constant Current-Regulation, constant Potential.)

456 STANDARD ELECTRICAL DICTIONARY.

Reguline. adj.

Having the characteristics of a piece of metal, being flexible, adherent, continuous, and coherent. Applied to electrolytic deposits.

Relative.

Indicating the relation between two or more things without reference to absolute value of any one of them. Thus one lamp may be of relatively double resistance compared to another, but this states nothing of the resistance in ohms of either lamp.

Relay.

A receiving instrument which moves in accordance with impulses of currents received, and in so moving opens and closes a local circuit, which circuit may include as powerful a battery as required or desirable, while the relay may be on the other hand so delicate as to work with a very weak current.

Fig. 287. RELAY.

The typical relay includes an electro-magnet and armature. To the latter an arm is attached and the lower end of the arm works in pivots. As the armature is attracted the arm swings towards the magnet. When the current is cut off, the armature and arm are drawn back by a spring.

When the arm swings towards the magnet its upper end touching a contact screw closes the local circuit. When it swings back it comes in contact with a second screw, with insulated point, and opens the circuit as it leaves the first named screw.

One terminal connects with the arm through the pivots and frame. The other connects with the contact screw through the frame carrying it.

Synonym--Relay Magnet.

457 STANDARD ELECTRICAL DICTIONARY.

Relay Bells.

Bells connected by relay connection to a main line for acoustic telegraphy. A stroke on one bell indicates a dot and on the other a dash. The system is now nearly extinct.

Relay, Box-sounding.

A relay which is surrounded by or mounted on a resonator or wooden box of such proportions and size as to reinforce the sound. This enables a relay to act as a sounder, its weak sounds being virtually magnified so as to be audible.

Relay Connection.

A connection used in telegraphy, including a local battery, with a short circuit normally open, but closed by a switch and a sounder or other appliance. The latter is made very sensitive so as to be worked by a feeble current, and is connected to the main line. A very slight current closes the switch and the local battery comes into operation to work a sounder, etc. When the current ceases on the main line the switch opens and throws the local battery out of action. The switch is termed a relay, q. v. A long main line may thus produce strong effects at distant stations, the intensity of action depending on the local battery.

Fig. 288. RELAY OR LOCAL CIRCUIT.

Relay, Differential.

A relay containing two coils wound differentially, and of the same number of turns and resistance. If two equal currents pa.s.s through the coils they counteract each other and no action takes place. If there is a difference in the currents the relay acts as one coil preponderates.

The coils may be wound for uneven currents with different resistance and number of turns.

Relay, Microphone.

A relay connection applied to a telephone circuit. It consists of a microphone mounted in front of the diaphragm of a telephone receiver. In circuit with the microphone is a battery and second telephone receiver.

The microphone is supposed to intensify the sounds of the first telephone.

458 STANDARD ELECTRICAL DICTIONARY.

Relay, Polarized.

A relay whose armature is of steel, and polarized or permanently magnetized, or in which a permanent magnet is used as the basis for the electro-magnets. In the relay shown in the cut the coils shown are mounted on cores carried on the end of a powerful bent permanent magnet.

Thus when no current pa.s.ses their upper poles are both of the same sign, and the horizontally vibrating tongue is held by the magnetic attraction against one or the other pole piece. If a current is sent through the electro-magnet it gives opposite polarity to the two polar extensions.

As the end of the vibrating tongue is of polarity determined by the permanent magnet it is attracted to one pole and repelled from the other. On cessation of current it remains attached by the permanent magnetism. If now a current is sent in the opposite direction the two poles again acquire opposite polarity, the reverse of the former, and the tongue flies across to the opposite side. On cessation of current it remains attached as before by the permanent magnetism.

In its movements to and fro the relay tongue opens and closes a contact, so as to work a sounder or other apparatus. The polarized relay is of high sensibility, and requires little or no change of adjustment.

Fig. 288. POLARIZED RELAY